Fluke 5500A-SC oscilloscoopkalibreerder
Fluke 5500A-SC Oscilloscope Calibrator
Offerte aanvragen
Fluke 5500A-SC multifunctionele kalibreerder met geïntegreerde oscilloscoopkalibratie tot 600 MHz voor uitgebreide elektrische verificatie.
Productdetails
| Model | 5500A-SC |
| Fabrikant | Fluke |
| Categorie | Kalibreerinstrumenten |
| Beschikbaarheid | Op bestelling |
Beschrijving
Overzicht
De Fluke 5500A-SC is een uitgebreide elektrische kalibreerder met geïntegreerde oscilloscoopkalibratiecapaciteit. Het levert gelijkspanning en wisselspanning en stroom met meerdere golfvormen, simuleert vermogen met fasebeheer en kan weerstand-, capaciteits- en temperatuursignalen van thermokoppels en RTD's leveren. De geïntegreerde oscilloscoopkalibratiefunction levert sinusgolfniveau, snelle flank, tijdmarkeringen en amplitudesignalen voor oscilloscoopkalibratie tot 600 MHz.
Belangrijkste kenmerken
- DC-spanningsbereik 0 tot ±1020V met ±50 ppm nauwkeurigheid
- DC-stroombereik 0 tot ±11A met ±0,01% nauwkeurigheid
- AC-spanning 1 mV tot 1020V (10 Hz tot 500 kHz) met ±0,03% nauwkeurigheid
- AC-stroom 29 mA tot 11A (10 Hz tot 10 kHz) met ±0,06% nauwkeurigheid
- Weerstandsbron 0 tot 3,29 MΩ met ±0,009% nauwkeurigheid
- Capaciteitsbron 0,33 nF tot 1,1 mF met ±0,25% nauwkeurigheid
- Thermokoppelsimulatie -250°C tot +2316°C (11 types)
- RTD-bron -200°C tot +630°C (8 types)
- DC en AC vermogenbronnen tot 11 kW met ±0,08% tot ±0,15% nauwkeurigheid
- Fasebeheer 0 tot ±179,99° met ±0,15° nauwkeurigheid
- Frequentiebereik 0,01 Hz tot 2,0 MHz met ±25 ppm nauwkeurigheid
- Geïntegreerde oscilloscoopkalibratie tot 600 MHz
- IEEE-488 (GPIB), RS-232 en optionele 5725A-interfaces
Toepassingen
- Oscilloscoop en ScopeMeter testgereedschap kalibrering
- Handheld- en bureaumultiëter kalibrering
- Wattmeter en stroomanalisator kalibrering
- Thermokoppel- en RTD-thermometer kalibrering
- Gegevenslogger- en stripkaartrecorder kalibrering
- Proceskalibrator en stroomtangkalibrering
- Uitgebreide elektrische instrumentkalibrering
Specificaties
| Features | Parameters |
| Voltage DC | Range: 0 to ±1020V Best 1 Year Specification: ±50 ppm of setting |
| Current DC | Range: 0 to ±11A Best 1 Year Specification: ±0.01% of setting |
| Resistance | Range: 0 to 3.29.999 MΩ Best 1 Year Specification: ±0.009% of setting |
| Voltage AC | Range: 1 mV to 1020V 10 Hz to 500 kHz, Sine Best 1 Year Specification: ±0.03% of setting |
| Current AC | Range: 29 m A to 11A 10 Hz to 10 kHz, Sine Best 1 Year Specification: ±0.06% of setting |
| Capacitance | Range: 0.33 nF to 1.1 mF Best 1 Year Specification: ±0.25% of setting |
| RTD Source | Range: -200°C to +630°C (8 types) Best 1 Year Specification: ±0.03°C of setting |
| DC Power | Range: 109 mW to 11 kW Best 1 Year Specification: ± 0.08% of setting |
| AC Power | Range: 109 mW to 11 kW 45-65 Hz, PF=1 Best 1 Year Specification: ± 0.15% of setting |
| Phase | Range: 0 to ± 179.99° Best 1 Year Specification: ±0.15° |
| Frequency | Range: 0.01 Hz to 2.0 MHz Best 1 Year Specification: ±25 ppm of setting |
| Warm up Time | Twice the time since last warmed up, to a maximum of 30 minutes |
| Settling Time | Less than 5 seconds for all functions and ranges except as noted |
| Standard Interfaces | IEEE-488 (GPIB), RS-232, 5725A (5500A only) |
| Temperature Performance | Operating: 0°C to 50°C Calibration: (tcal): 15°C to 35°C Storage: -20°C to 70°C |
| Temperature Coefficient | Temperature coefficient for temperatures outside tcal ± 5°C is 10% of the 90-day specification (or 1-year, as applicable) per °C |
| Relative Humidity | Operating: < 80% to 30°C, < 70% to 40°C, < 40% to 50°C Storage: < 95%, non-condensing |
| Altitude | Operating: 3,050m (10,000 ft) maximum Non-operating: 12,200m (40,000 ft) maximum |
| Safety | Designed to comply with: IEC 1010-1 (1992-1); ANSI/ISA-S82.01-1994; CAN/CSA-C22.2 No. 1010.1-92 |
| Analog Low Isolation | 20V |
| EMC | Designed to comply with FCC Rules Part 15 |
| Line Power | Line Voltage (selectable): 100V, 120V, 220V, 240V Line Frequency: 47 to 63 Hz Line Voltage Variation: ± 10% about line voltage setting |
| Power Consumption | 300 VA |
| Calibration Documentation | 17025 accredited report of calibration included |
| Dimensions | Height: 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet on bottom of unit Width: 43.2 cm (17 in), standard rack width Depth: 47.3 cm (18.6 in) overall |
| Weight (without options) | 20 kg (44 lbs.) |
| Absolute Uncertainty Definition | 5500A and 5520A uncertainty specifications include stability, temperature coefficient, linearity, line and load regulation, and the traceability of the external standards used for calibration. You do not need to add anything to determine the total uncertainty of your calibrator for the temperature range indicated. |
| Specification Confidence Interval | > 99% |
| 5500A-SC300 | 300 MHz Oscilloscope Calibration Option |
| 5500A-SC600 | 600 MHz Oscilloscope Calibration Option |
Offerte aanvragen
Fluke 5500A-SC oscilloscoopkalibreerder
Reactie binnen 24 uur
Vrijblijvend
Direct contact