EXFO SPSB-B-150-98-88 Testlancerkabel
EXFO SPSB-B-150-98-88 Launch Test Cable
Offerte aanvragen
EXFO SPSB-B-150-98-88 is een testlancerkabel van 150 m voor enkelbrekingsvezel voor OTDR-vezeltest, waarmee verlies kan worden gemeten op eerste en laatste vezelverbindingen.
Productdetails
| Model | SPSB-B-150-98-88 |
| Fabrikant | EXFO |
| Categorie | Netwerk- en Glasvezeltoetsing |
| Beschikbaarheid | Op bestelling |
Beschrijving
Overzicht
De EXFO SPSB-B-150-98-88 is een draagbare pulsdemper van 150 meter voor OTDR-testen (Optical Time-Domain Reflectometer). Dit maakt nauwkeurige verliesmeting op vezelverbindingen mogelijk door de OTDR-doodzone in te vullen, wat essentieel is voor nauwkeurige karakterisering van vezelverbindingen en verificatie van installatieacceptatie.
Belangrijkste kenmerken
- 150 m enkelbrekingsvezel (9/125 µm) breidt OTDR-meetbereik voorbij doodzone uit
- SC/APC-connectoren voor compatibiliteit met de meeste OTDR- en patchpaneel-poorten
- Connectorinsertieverlies < 0.5 dB voor minimale signaalverzwakking
- APC-connectorreflectiviteit < –60 dB voor nauwkeurige backscatter-metingen
- Draagbare zacht transporttas voor veldgebruik
- Vermindert OTDR-connectorverzwakking door directe koppeling te elimineren
Toepassingen
- Karakterisering en verliesmeting van vezelverbindingen
- Installatieacceptatietesten voor vezelnetwerken
- Kabelprobleemoplossing en onderhoud
- Verliesmeting op eerste en laatste verbinding in vezelspannen
Specificaties
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Feature | Description |
| SPSB-B-150 | Soft pulse suppressor bag, singlemode fiber 9/125, 150 m |
| 88 | SC/APC narrow key |
| 98 | LC/PC |
Offerte aanvragen
EXFO SPSB-B-150-98-88 Testlancerkabel
Reactie binnen 24 uur
Vrijblijvend
Direct contact