Rohde & Schwarz SMHU58 RF-signaalgenerator met hoge nauwkeurigheid
Rohde & Schwarz SMHU58 High Accuracy Signal Generator
Offerte aanvragen
Rohde & Schwarz SMHU58 RF-signaalgenerator met hoge nauwkeurigheid met frequentiebereik van 100 kHz tot 4.32 GHz en 0.1 Hz resolutie voor geavanceerde ontvanger en LO-toepassingen.
Productdetails
| Model | SMHU58 (0835.8011.58) |
| Fabrikant | Rohde & Schwarz |
| Categorie | RF- en microgolfsignaalvormers |
| Beschikbaarheid | Op bestelling |
Beschrijving
Overzicht
De Rohde & Schwarz SMHU58 is een krachtige RF-signaalgenerator ontworpen voor veeleisende meet- en testtoepassingen. Met frequentiedekking tot 4.32 GHz en uitzonderlijke spectrale zuiverheid is de SMHU58 ideaal voor ontvangertesten, lokale oscillator toepassingen en ruismeetsystemen waarbij signaalkwaliteit essentieel is.
Belangrijkste kenmerken
- Frequentiebereik: 100 kHz tot 4320 MHz met 0.1 Hz resolutie
- Frequentie-instellingstijd: onder 10 ms
- Snelle sweepstand: tot 200 door gebruiker gedefinieerde frequenties in minder dan 1 ms per instelling
- Uitzonderlijke spectrale zuiverheid voor buurkanaal- en buitenkanaalmetingen
- FM-modulatie: DC tot 1 MHz met minimale frequentieverplaatsing in FM DC-stand
- AM-modulatie: DC tot volledige modulatiefrequentiebereik met vlak frequentieverloop voor VOR/ILS ontvangertesten
- Pulsmodulatie: 20 ns stijg-/daltijden (typisch <10 ns voor frequenties >200 MHz) met 80 dB aan/uit verhouding
- Faseverplaatsing: instelbaar in stappen van 1°
Toepassingen
- Ontvanger selectiviteit en gevoeligheidstesten
- Lage-ruistransformator lokale oscillator referentietoepassingen
- Referentiesignaal voor ruismeetsystemen
- Telemetrie- en satelliettestcommunicatie
- Radar- en microgolf linksysteemtesten
Specificaties
| Frequency | The frequency can be set with a resolution of 0.1 Hz over the entire range, and this is sufficient even for measurements on extremely narrowband DUTs. Both instruments supply frequencies down to 1 kHz. The frequency setting time is below 10 ms. In the fast mode up to 200 user-defined frequencies can be handled by means of a trigger signal or by memory sweep in less than 1 ms per setting. |
| Spectral Purity | R&S®SMGU/SMHU fulfill requirements for selectivity measurements on top-class receivers. Signals of extremely high spectral purity afford critical adjacent-channel, in-channel and out-of-channel measurements with a wide tolerance margin. Phase noise remains low right up to the carrier. R&S®SMGU/SMHU are therefore ideal for LO applications or as a low-noise reference in noise measurement systems. |
| Frequency Modulation | The FM modulation frequency range extends from DC to 1 MHz. In FM DC mode a high carrier-frequency accuracy is attained. The frequency offset occurring with FM DC selected is extremely small. |
| Amplitude Modulation | The whole of the modulation frequency range can be used down to carrier frequencies of less than 100 kHz. The minimal phase shift at 30 Hz (AM DC) and a flat frequency response make for the precision amplitude modulation that is required for testing VOR/ILS navigation receivers. |
| Pulse Modulation | Rise/fall times of 20 ns (typ. <10 ns for frequencies >200 MHz) and an on/off ratio of 80 dB open up a wide range of possibilities for testing telemetry, microwave link, radar and satellite communications systems. |
| Digital and Analog Sweep | In addition to the digital, step-by-step sweep with presettable start and stop frequency, span, step width and step time, an analog frequency and level sweep is also provided. |
| Phase Offset | The phase of the RF output signal can be varied in steps of 1 using keyboard entry or the spinwheel. This makes it easier to adjust for phase quadrature during noise measurements and to investigate phase-critical components. |
Offerte aanvragen
Rohde & Schwarz SMHU58 RF-signaalgenerator met hoge nauwkeurigheid
Reactie binnen 24 uur
Vrijblijvend
Direct contact