Amplifier Research 75S1G6C RF-vermogensversterker
Amplifier Research 75S1G6C RF Power Amplifier
Offerte aanvragen
Amplifier Research 75S1G6C is een 75-watt Class A RF-vermogensversterker die 1,0–6,0 GHz dekt met aanpassingstolerantic en afstandsbediening via Ethernet, USB, GPIB en RS-232.
Productdetails
| Model | 75S1G6C |
| Fabrikant | Amplifier Research |
| Categorie | RF- en microgolftestapparatuur |
| Beschikbaarheid | Op bestelling |
Beschrijving
Overzicht
De Amplifier Research 75S1G6C is een solid-state Class A RF-vermogensversterker ontworpen voor toepassingen waarvoor momentane bandbreedte, hoge versterking en superieure lineariteit vereist zijn. Het levert minimaal 75 watt over zijn 1,0–6,0 GHz werkbandbreedte met ingebouwde bescherming tegen invoer-overdrive en diverse foutcondities inclusief overtemperatuur en voedingsfalen. Het modulaire ontwerp maakt eenvoudig onderhoud en service mogelijk.
Belangrijkste kenmerken
- 75 watt CW over 1,0–6,0 GHz bandbreedte
- Class A ontwerp voor uitzonderlijke lineariteit en lage spoorzuivering
- 100% aanpassingstolerant—blijft werken in hoge VSWR-belastingen inclusief open en kortsluitingen
- Ingebouwde foutcontrole en bescherming tegen overtemperatuur en voedingsfalen
- Meerdere afstandsbedieningsopties: Ethernet, USB, GPIB (IEEE-488), vezeloptische serieel en RS-232
- Lage akoestische ruiswerking
- Modulair ontwerp voor eenvoudig onderhoud
Toepassingen
- EMC-tests (militair, luchtvaart, automobiel, commercieel)
- Bestraalde en geleidende EMC-tests
- Algemeen doel RF-, antenne- en componenttests
- Draadloze en communicatie onderdeel- en subsysteemtests
- 5G-testtoepassingen
Specificaties
| Front Panel Display | A front panel display indicates the operational status and fault conditions. All amplifier control functions, and status indications are available remotely using GPIB/IEEE-488, RS-232, fiber-optic serial, USB, or Ethernet. Interface connectors are located on the back panel. Local and remote operation is managed by a switch on the front panel. |
| Multiple Purpose Amplifier | This is a multiple purpose amplifier. The low level of spurious signals and linearity make it ideal for use as a driver in testing wireless and communication components and subsystems. By covering such a wide bandwidth, it is suitable for 5G testing applications. Due to the Class A design, it is also suitable for EMC Test applications where continued operation into high VSWR loads including open and short circuits is required. |
| Export Classification | The export classification for this equipment is 3A001. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited. |
| Feature | SymbolMinimumTypicalMaximum |
| Rated Power Output | PSAT75W85W>125W |
| Input for Rated Output | Pin----1.0mW 0dBm |
| Power Output @ 1 dB Compression | P1dB50W70W>100W |
| Power Output @ 3 dB Compression | P3dB65W85W>120W |
| Operating Frequency | BW1.0GHz--6.0GHz |
| Gain (Small Signal) | 51dB54dB56dB |
| Flatness | ∆G--±1.5dB±2.5dB |
| Input Impedance | Z in--50Ω 1.5:1 VSWR -- 2.0:1 VSWR |
| Output Impedance | Z out--50Ω-- |
| 3rd Order Intercept | IP3--+56dBm-- |
| Noise Figure | NF--10dB-- |
| Spurious | ---73dBc-- |
| Power Consumption | PD----450W |
| Feature | Parameter |
| Cooling | Forced air (self-contained fans) Side inlets / rear outlet Δt = +7°C (typical) |
| Regulatory Compliance | EMC: EN 61326-1 Safety: UL 61010-1 CAN/CSA C22.2 #61010-1 CENELEC EN 61010-1 RoHS: Directive 2011/65/EU Export: 3A001 |
| Connector Interfaces | RF input: N female (50 Ω) RF output: N female (50 Ω) IEEE-488: 24-pin female RS-232: 9-pin subminiature D female RS-232 (fiber optic): ST USB 2.0: Type B Ethernet: RJ-45 Interlock: 15-pin subminiature D female AC: C14 |
Offerte aanvragen
Amplifier Research 75S1G6C RF-vermogensversterker
Reactie binnen 24 uur
Vrijblijvend
Direct contact